Chain actuator | Twin-Quasar

Beskrivelse

Chain actuator with encoder – Force in push action 600 N – Maximum stroke 500 mm

• Stainless steel double link chains.
• The control electronic circuit synchronizes the speed of the motors through encoder.
• Anodized (silver) or painted (white or black) aluminium casing.
• The manual closing position regulation is not required: the stop in closing position is regulated by an electronic limit switch.
• Being provided with two chains, it is particularly suitable for very wide windows (minimum 1550 mm width). For a better aesthetic result, on request, it is possible to supply actuators with customized distance between the chain (minumum 700 mm) in order to install an actuator as long as the window.
• Supplied with 1,5 m cable and pivoting brackets.
• The installation without brackets is possible only if the height of the vent is at least 1500 mm.
• In case of vents with four-bar hinges, please contact our Technical Dpt. for choosing the suitable fixing bracket.
• If installed on PVC windows, the profile has to be reinforced.
• 24 Vdc version is suitable for installation on smoke and heat extraction systems in conformity to UNI EN 12101-2 Standard.

SPECIFICATION PROSPECTS
Electric chain actuator Ultraflex Control System named Twin Quasar-S with two stainless steel double link chains and electronic circuit for the two
internal motors control. Force 600 N. Stroke 500 mm. Voltage supply 100-240 vac or 24 Vdc. Electronic limit stop and electronic stop in the
intermediate positions in case of overload. Pivoting brackets included. Parallel connection. Aluminium casing anodized or painted. Conform to
2006/95/CE and 89/336/ CEE directives (the 24 Vdc version is conform to 89/336/CEE direction).

The instructions for a safe installation are included in the section “SECURITY WARNINGS”